Is that the convertible one? Short or long?? Somebody on here has a Sparrow, supposed to be good. I think a 22 can would get the most usage. I wonder if they would work on 22 mag??Faint consideration for switchback 22 but it looks too futuristic for even RoboCop
If it's the quietest can ever made, maybe I could get past the appeal. Just looks out of place on a firearm.
The design of the oculus says first round pop is eliminated.I have a sparrow2 ss, it's nice. FRP is a little loud. Dead air mask is a quieter can.
Sent from my SM-G981V using Tapatalk
Every 1000 rounds roughly they need to be disassembled and cleaned. Lot's of carbon and lead buildup.I have heard you should buy one that you can disassemble for cleaning as .22s are extremely dirty.
Would you have chosen the mask over the switchback if it was in stock?I have the switchback, when I was in the market I first considered the dead air mask but when I got serious there weren’t any masks available anywhere. Yes the switchback is modern looking but that’s on purpose cause it can be reconfigured many ways so the flats enable you to put the provided wrenches in place to loosen and tighten. I will be keeping it in the rifle optimum configuration cause I have another can for my handguns.
I don't know much truth to this but some of these cans are rated for 5.7fn. A friend said you can clean the can by running some supersonic 5.7 through it and it will blow the carbon and lead out.Every 1000 rounds roughly they need to be disassembled and cleaned. Lot's of carbon and lead buildup.
Sent from my SM-G981V using Tapatalk
I take mine apart and let it soak in the "Dip" solution! You cannot shoot them clean, they must be cleaned! The rounds must be subsonic 1100 fps or slower. I use CCI standard velocity which is rated at 1070 fps with no problems. Any questions, call the silencer shop in TX. They are great people and will answer any questions for you. That is where I bought mine. silencershop.comI don't know much truth to this but some of these cans are rated for 5.7fn. A friend said you can clean the can by running some supersonic 5.7 through it and it will blow the carbon and lead out.
It may burn off some carbon, but it's not going to do much for the lead. It is caked on almost as if you dripped molten lead inside the can.I don't know much truth to this but some of these cans are rated for 5.7fn. A friend said you can clean the can by running some supersonic 5.7 through it and it will blow the carbon and lead out.
The Mask is full auto rated. It also has 9 slotted baffles which helps in the cleaning. Check it out on youtube!This article almost has me sold on the rugged, but there is a lot of praise for the mask as well.
Speaking of the rugged here and not that I need this feature, but shows it's construction, it's belt fed rated!
"Another impressive feature of the Oculus is its slotted baffles, which help create a seal to prevent lead from seizing the suppressor’s tube up. Rugged’s baffle design makes for no first round pop in its full configuration, and allows for ease of disassembly and reassembly."