XDS tru glo TFX help (need an installer)

[smithnsig]

Any local gunsmith install truglo TFX for a reasonable price?
Can send the slide off to get done but rather have it done locally.
How much?

 

[TennJeep1618]

I'm sure there will be plenty of people chime in with suggestions of local gunsmiths, but would you consider doing it yourself?

What kind of gun? Do you have a vise, a brass (or better yet, nylon) punch and a hammer?

 

[smithnsig]

I'm sure there will be plenty of people chime in with suggestions of local gunsmiths, but would you consider doing it yourself?

What kind of gun? Do you have a vise, a brass (or better yet, nylon) punch and a hammer?

I usually do my own but the springfields are known to be tight even removing them. If it was typical steel night sights I would do them but being pretty expensive tritium fiber optics, I'll leave it to the pros. I don't have a pusher.

 

[SAWMAN]

It can be done ... however ... IMO pushing beats banging every time. Especially on the initial lineup of the sights with the dovetail. --- SAWMAN

 

[1911Junky]

They are certainly tight, but with the correct sight pusher it's not hard at all.

I can change them out for you at TGD Firearms.

 

[smithnsig]

They are certainly tight, but with the correct sight pusher it's not hard at all.

I can change them out for you at TGD Firearms.

10-4. They were a birthday gift, I finally got something I wanted!

I'll swing down. When are you there? Friday?

 

[1911Junky]

I'm there on Mondays.

 

[SAWMAN]

Curious as to how much this service will cost..

I was told by the owner a couple months ago that he was getting a new sight pusher. I asked,if you buy a set of Glock sights from him would they install them for free. He stated that it would cost $35.00. --- SAWMAN

 

[1911Junky]

Sight installation is $35. We typically do not charge to install glock sights if purchased there.