What gun stuff did you do today?

[Rebel_Rider1969]

Another one. Size 12 boot.



Love to see this beast!

Some of the plots are 300, there's also areas where a 700 yard shot could be made. Good excuse to get a new rifle!

 

[skyydiver]

Earlier this week I bought an AR pistol case at the thrift store for $2. The cashier made sure I knew that there was no racket in the case. Now that I know it works I will start stopping through some on a regular basis to try and get a few more.
View attachment 80720

View attachment 80721

Lol... My 10.5 happens to be a Prince. Also, 30 “ball can” seems to fit fine in the racquet.


Sent from my iPhone using Tapatalk

 

[RackinRay]

I have so far resisted the latest batch of Beretta Model 71s that Classic has received. It is hard, as they are a pretty darn cool little pistol!
https://www.classicfirearms.com/beretta-model-71-pistol-22lr-8-round-with-faux-suppressor-surplus/

 

[Daezee]

Looks to be a unicorn track. --- SAWMAN

Sawman has been teaching me tracking. If he sez Unicorn, then Unicorn it is.

 

[Rebel_Rider1969]

Dead dillo. Pf9 +20 feet. bad pix, battery was dead. Center shot, in and out. Looked like a mixmaster had been used. Bleh!

 

[SAWMAN]

Hate to tell you this . . BUT . . a Gen.3 Glock 19 would have killed him deader (mo-dead).
That is a male diller also. --- SAWMAN

 

[Rebel_Rider1969]

Hate to tell you this . . BUT . . a Gen.3 Glock 19 would have killed him deader (mo-dead).
That is a male diller also. --- SAWMAN

A 19 with no sights, I bet.

Yep, it's a Male. Pistol in left hand, 3 cell mag light in other reverse grip. Spun him around and ended upside down. I normally use the heritage arms .22. Had to grab headphones off my metal detector. Grey ghosts, same as thunder 29's but have speakers. Wasn't going to shoot this cannon without earpro.

 

[Fathertime]

Picked this up today its a Dan Wesson model 15-2 pistol pack in 357 magnum. The pack has the 8 in. 6 in. 4 in and the 2 1/2 in. barrels but also came with the 10 and 15 inch barrels. made around the latter 70's and was purchased in 79.

 

[SAWMAN]

Great combo there sir.
Had a buddy that had one chembered in .445. It was his hunting gun. --- SAWMAN

 

[Daezee]

Decided since I'm shooting cast bullets in the Swiss and Swede's, I might as well work up a cast bullet load for my 1930 vintage M1903A1 NM Springfield. Loaded up test rounds for shooting it tomorrow.

 

[Rebel_Rider1969]

Picked up some cool parts for a future build. Magpul 2 or 1 pts sling, Anderson lpk, magpul stock and regular stock. $80

 

[wildrider666]

Bet that set you back a few bucks! I bought a 6 inch around 78'. An outstanding reolver, smooth action and a tack driver. I loved the deep rich blue appearance, never saw anything like it. However, I managed to "chip" the blue on the trigger guard resulting in a white course divot. I don't know how the process is done but I was very disappointed.

 

[Fathertime]

Bet that set you back a few bucks! I bought a 6 inch around 78'. An outstanding reolver, smooth action and a tack driver. I loved the deep rich blue appearance, never saw anything like it. However, I managed to "chip" the blue on the trigger guard resulting in a white course divot. I don't know how the process is done but I was very disappointed.

Yep was a little pricy but hey I was in the market for a 357 so now I have six lol. The sad part about it is that if I was to part it out I could make a good bit more on it than selling it as it is.

 

[wildrider666]

I liked the ability to set the barrel forcing cone to cyclinder gap. IIRC the provided tool was .003. I think the locking/tensioning of the barrel by the muzzel nut greatly to the guns accuracy. Again, fine gun. Enjoy!

 

[Fathertime]

I was looking at two Smith and Wesson models both current production but when I read the reviews about one of them it made me shy, and I physically looked at the other and wasn't real happy with some things, both guns are preformance center guns and are having lock up problems. Glad I ran across this because of its versitility. Like I said I now have six guns. Back in the mid 80's I was offered one of these for $350.00 for the whole kit, boy have things changed since then. The quality then still is far better than what is offered today.

 

[Rebel_Rider1969]

I had the 15-2 in 6 inch. Sold it, regretted it. Best shooting trigger I've ever shot.

 

[RackinRay]

After reading the workbench section I did a web search and decided I would go for this one:
https://www.harborfreight.com/48-in-workbench-with-light-60723.html?_br_psugg_q=workbench

Assembly is ~80% complete due to bad instructions. The bags of bolts and nuts were labeled with a letter, but not specified in any of the instructions. 8 bolts in I figured the ones I used were not present in the quantity to be enough for assembly. Medium bolt was the one I started with; should have started with the shortest bolts, and I should have figured that out before starting.

 

[Rebel_Rider1969]

I looked at that one, thought it was too flimsy for my use. The one I got is very sturdy. Found my 5 inch vise gonna clean it up and mount it on the table.

 

[RackinRay]

After getting the frame from bench top down all bolted together it seems very sturdy as review I saw said. Since I wanted it for light assembly, cleaning, and other light work I do not expect to require a lot of force it should suit my needs.

 

[FLT]

Change my tactical 300 blk bolt gun into a fudd gun , got rid of the black plastic stock and put it in a nice walnut wood stock.