SOLD
For sale, US-Property Marked M4 Carbine 16" rifle. Built from Palmetto State Armory components with a nicely-matched in fit and finish upper/lower receiver set. Built this and an M4A1 Block 1 clone recently; I like the other rifle more due to the RAS so this is for sale. Great budget AR with bonus of being close to what the military issues - nicer finish than any Colt I have seen in a decade and equal to an FN. There is no play between upper and lower; FSB is straight; bolt carrier is properly staked; finished with Aero lower parts kit.
ACOG is not included and not for sale or trade. I will include the KAC replica rear sight though, a Defense Solutions Group 30 round grey teflon-coated magazine and a black padded sling. There is a UID tag inbound for it from Carolina Laser Works with appropriate Manufacturer Cage Code, Part Number & Serial that will be applied to the receiver at your request.
Photos:
Lower Receiver Details:
Material: Made from 7075-T6 Aluminum
Finish: Black, Hardcoat Type 3 Anodized
Caliber: 5.56mm
Fire Selector: "SAFE" (Safe), "SEMI" (Fire), "BURST" (Full-Auto)
Upper Receiver Details:
Barrel: Phosphate coated 4150V Chrome Moly steel. Chambered in 5.56 NATO, with a 1:8 twist, M4 barrel extension, and a carbine-length gas system. Barrel is is finished off with a standard handguard, F-Marked gas sight base, and A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized, features a forged upper receiver. These uppers are made for us right here in the USA by a mil-spec manufacturer.
Bolt: Full-auto profile bolt carrier group. Mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
$800 Firm, not looking for trades and the ACOG is not for sale/trade/included.
Thanks for looking!
SOLD
For sale, US-Property Marked M4 Carbine 16" rifle. Built from Palmetto State Armory components with a nicely-matched in fit and finish upper/lower receiver set. Built this and an M4A1 Block 1 clone recently; I like the other rifle more due to the RAS so this is for sale. Great budget AR with bonus of being close to what the military issues - nicer finish than any Colt I have seen in a decade and equal to an FN. There is no play between upper and lower; FSB is straight; bolt carrier is properly staked; finished with Aero lower parts kit.
ACOG is not included and not for sale or trade. I will include the KAC replica rear sight though, a Defense Solutions Group 30 round grey teflon-coated magazine and a black padded sling. There is a UID tag inbound for it from Carolina Laser Works with appropriate Manufacturer Cage Code, Part Number & Serial that will be applied to the receiver at your request.
Photos:
Lower Receiver Details:
Material: Made from 7075-T6 Aluminum
Finish: Black, Hardcoat Type 3 Anodized
Caliber: 5.56mm
Fire Selector: "SAFE" (Safe), "SEMI" (Fire), "BURST" (Full-Auto)
Upper Receiver Details:
Barrel: Phosphate coated 4150V Chrome Moly steel. Chambered in 5.56 NATO, with a 1:8 twist, M4 barrel extension, and a carbine-length gas system. Barrel is is finished off with a standard handguard, F-Marked gas sight base, and A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized, features a forged upper receiver. These uppers are made for us right here in the USA by a mil-spec manufacturer.
Bolt: Full-auto profile bolt carrier group. Mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
$800 Firm, not looking for trades and the ACOG is not for sale/trade/included.
Thanks for looking!
SOLD
Last edited: