- Price
- 3750 OBO
- Item Location
- MOLINO/CANTONMENT
HELLO GCGF!
***10.5 inch AR-15 Pistol for Sale*** (reasonable offers will be considered!)
**This pistol was designed to be my "never fail" premium build purposed to defend and preserve life. Lower receiver was purchased as an 80% billeted receiver and completed using a CNC router machine using a helical 3 fluted carbide end mill, followed by undersize drilling both FCG pockets undersized then reamed out to spec with (2) sizes of precision chuck reamers, followed by chamfering and deburring the receiver. Please let me know if you have any additional questions via PM. Please READ below.
*All parts are made in the USA and backed by the respective manufacturer’s warranties 100%. All parts are like new with very minimal usage.
Shot count: less than 100 with flawless 3 o’clock ejection pattern using factory and handloaded ammunition.
Completely sighted in @ 50yds & 100rds on HWS weapon sight and ready to make it happen Captain.
HERE ARE THE HARD NO’s I WILL INEVITABLY HAVE TO ANSWER:
*I CANNOT AND WILL NOT CANNIBALIZE ANY PART(S) NOR SEPARATE EITHER UPPER OR LOWER REC.
*NO TRADES PLEASE! I HAVE NO USE FOR MORE GUNS OR AMMO OR PRIMERS OR YOUR BROTHERD AUNTS (3) SHEETS OF PLYWOOD, THANK YOU!
*I CAN accept Cash, mobile transfers such as Cash App, Venmo, Zelle, Paypal (friends and family xfer only!)
*PRICE – THIS WEAPON IS NOT A PALMETTO STATE SPECIAL NOR IS IT A GUNSHOW CASH GRABBER, WITH ALL JOKING ASIDE THIS BUILD IS NOT CHEAP AND UNLIKE THE OVERSATURATED BUDGET GUNS OUT THERE. THAN THE NORM WITH EVERY ATTENTION TO DETAIL ACCOUNTED FOR. WANT IT ENGRAVED? I CAN DO THAT TOO.
WEAPON PURPOSE: DESIGNED FOR BOTH RANGE TRIPS AND HOME DEFENSE IN MIND,... IT IS ALSO AN EXCELLENT WEAPON TO RELIABLY FEED, CYCLE, AND EJECT COTRIGGER PULL. REMOVE THREATS WITHIN A 300YD RADIUS IN TRAINED AND EXPERIENCED HANDS. THIS WEAPON CYCLES AS REQUIRED WITHOUT FEEDING ISSUES, EJECTION ISSUES, OR JAMS. IT TOOK APPROX 1.25 YEARS TO DESIGN A FULLY OPTIMIZED WEAPON WHICH HAS BEEN STORED AS APPROPRIATE UNTIL USE. WITH THAT SAID “QUALITY AINT CHEAP AND CHEAP AINT QUALITY! TEST FIRING PRIOR TO PURCHASING IS WELCOMED.
ADDITIONAL ACCESSORIES INCLUDED:
ORIGINAL BOXES FOR EOTECH AND VORTEX OPTICS, (1) DOUBLE RIFLE SOFT GUN CASE (FDE), AND (2) PMAG 30RD MAGS (UNLESS SPECIFIED BY YOUR LOCATION)
ANY LAWS APPLICABLE TO YOUR AREA IS THE BUYER’S RESPONSIBILITY. BY PURCHASING YOU UNDERSTAND THAT THE ASSUME OWNERSHIP OF THIS WEAPON THUS REMOVING FROM SELLER (ANY AND ALL) POSSIBILITY OR ACTUAL LIABILITY, RESPONSIBILITY, ETC FOR ANY/ALL FUTURE OUTCOMES/ACTIONS WHICH MAY INCLUDE DAMAGES, LOSS OF LIFE, INJURIES, PROPERTY DAMAGE, ETC.
PLEASE BE RESPONSIBLE AND HANDLE ALL FIREARMS AS LOADED.
Upper Receiver:
**Ballistic Advantage 10.5-in .223 Wylde barrel w/1:8 twist (like new - less than 100 rounds)
**SLR Rifleworks muzzle device
**Superlative Arms adj gas block .750 w/nitride gas tube (black set screw style)
**Radian Raptor nickel/black 7075 aluminum ambi charging handle
**Billet M-Lok 9-in hand guard with anti-rotational tabs - fits into matching billet upper giving a monolithic appearance
**Billet slick side anodized upper receiver w/Strike Industries dust door
**Magpul M-Lok vertical grip
**Cryptic Coatings BCG w/midnight black coating (like new - less than 100 rounds) springs for ejector and extractor both upgraded to Sprinco Components
Lower Receiver:
**Iconic Industries AR-15 Instigator lower receiver – machined privately
**Hiperfire Eclipse nickel boron coated fire control group
**Lower parts kit made in the USA
**Phase 5 ambi safety/selector
**Magpul K2 pistol grip
**Buffer system Sprinco red/white spring w/standard buffer, multi position buffer tube
**Strike Industries take down pins (Shift pins black)
**Fortis Enhanced K2 castle nut system
Optics:
**Eotech XS2 holographic weapon sight (like new – less than 1 hour run time)
**Vortex Micro 3X Magnifier (like new – less than 1 hour use)
**Magpul MBUS Pro 45° back up sights
Additional:
Please see pictures for small parts that have been upgraded or enhanced which are included in purchase price.
In the North Pensacola Area by 9 mile rd. Bill of sale required for private sale. If you would like to have the sale facilitated at a gun shop then by all means lets make it happen THANKS!
***10.5 inch AR-15 Pistol for Sale*** (reasonable offers will be considered!)
**This pistol was designed to be my "never fail" premium build purposed to defend and preserve life. Lower receiver was purchased as an 80% billeted receiver and completed using a CNC router machine using a helical 3 fluted carbide end mill, followed by undersize drilling both FCG pockets undersized then reamed out to spec with (2) sizes of precision chuck reamers, followed by chamfering and deburring the receiver. Please let me know if you have any additional questions via PM. Please READ below.
*All parts are made in the USA and backed by the respective manufacturer’s warranties 100%. All parts are like new with very minimal usage.
Shot count: less than 100 with flawless 3 o’clock ejection pattern using factory and handloaded ammunition.
Completely sighted in @ 50yds & 100rds on HWS weapon sight and ready to make it happen Captain.
HERE ARE THE HARD NO’s I WILL INEVITABLY HAVE TO ANSWER:
*I CANNOT AND WILL NOT CANNIBALIZE ANY PART(S) NOR SEPARATE EITHER UPPER OR LOWER REC.
*NO TRADES PLEASE! I HAVE NO USE FOR MORE GUNS OR AMMO OR PRIMERS OR YOUR BROTHERD AUNTS (3) SHEETS OF PLYWOOD, THANK YOU!
*I CAN accept Cash, mobile transfers such as Cash App, Venmo, Zelle, Paypal (friends and family xfer only!)
*PRICE – THIS WEAPON IS NOT A PALMETTO STATE SPECIAL NOR IS IT A GUNSHOW CASH GRABBER, WITH ALL JOKING ASIDE THIS BUILD IS NOT CHEAP AND UNLIKE THE OVERSATURATED BUDGET GUNS OUT THERE. THAN THE NORM WITH EVERY ATTENTION TO DETAIL ACCOUNTED FOR. WANT IT ENGRAVED? I CAN DO THAT TOO.
WEAPON PURPOSE: DESIGNED FOR BOTH RANGE TRIPS AND HOME DEFENSE IN MIND,... IT IS ALSO AN EXCELLENT WEAPON TO RELIABLY FEED, CYCLE, AND EJECT COTRIGGER PULL. REMOVE THREATS WITHIN A 300YD RADIUS IN TRAINED AND EXPERIENCED HANDS. THIS WEAPON CYCLES AS REQUIRED WITHOUT FEEDING ISSUES, EJECTION ISSUES, OR JAMS. IT TOOK APPROX 1.25 YEARS TO DESIGN A FULLY OPTIMIZED WEAPON WHICH HAS BEEN STORED AS APPROPRIATE UNTIL USE. WITH THAT SAID “QUALITY AINT CHEAP AND CHEAP AINT QUALITY! TEST FIRING PRIOR TO PURCHASING IS WELCOMED.
ADDITIONAL ACCESSORIES INCLUDED:
ORIGINAL BOXES FOR EOTECH AND VORTEX OPTICS, (1) DOUBLE RIFLE SOFT GUN CASE (FDE), AND (2) PMAG 30RD MAGS (UNLESS SPECIFIED BY YOUR LOCATION)
ANY LAWS APPLICABLE TO YOUR AREA IS THE BUYER’S RESPONSIBILITY. BY PURCHASING YOU UNDERSTAND THAT THE ASSUME OWNERSHIP OF THIS WEAPON THUS REMOVING FROM SELLER (ANY AND ALL) POSSIBILITY OR ACTUAL LIABILITY, RESPONSIBILITY, ETC FOR ANY/ALL FUTURE OUTCOMES/ACTIONS WHICH MAY INCLUDE DAMAGES, LOSS OF LIFE, INJURIES, PROPERTY DAMAGE, ETC.
PLEASE BE RESPONSIBLE AND HANDLE ALL FIREARMS AS LOADED.
Upper Receiver:
**Ballistic Advantage 10.5-in .223 Wylde barrel w/1:8 twist (like new - less than 100 rounds)
**SLR Rifleworks muzzle device
**Superlative Arms adj gas block .750 w/nitride gas tube (black set screw style)
**Radian Raptor nickel/black 7075 aluminum ambi charging handle
**Billet M-Lok 9-in hand guard with anti-rotational tabs - fits into matching billet upper giving a monolithic appearance
**Billet slick side anodized upper receiver w/Strike Industries dust door
**Magpul M-Lok vertical grip
**Cryptic Coatings BCG w/midnight black coating (like new - less than 100 rounds) springs for ejector and extractor both upgraded to Sprinco Components
Lower Receiver:
**Iconic Industries AR-15 Instigator lower receiver – machined privately
**Hiperfire Eclipse nickel boron coated fire control group
**Lower parts kit made in the USA
**Phase 5 ambi safety/selector
**Magpul K2 pistol grip
**Buffer system Sprinco red/white spring w/standard buffer, multi position buffer tube
**Strike Industries take down pins (Shift pins black)
**Fortis Enhanced K2 castle nut system
Optics:
**Eotech XS2 holographic weapon sight (like new – less than 1 hour run time)
**Vortex Micro 3X Magnifier (like new – less than 1 hour use)
**Magpul MBUS Pro 45° back up sights
Additional:
Please see pictures for small parts that have been upgraded or enhanced which are included in purchase price.
In the North Pensacola Area by 9 mile rd. Bill of sale required for private sale. If you would like to have the sale facilitated at a gun shop then by all means lets make it happen THANKS!
