Item
Pelican Hardigg AL2624-1205 Case
Contact Info
Ben 850-712-4455
Price
$85 Each. All four for $300. Willing to consider trades for firearms +/- cash.
Item DescriptionThese are Hardigg AL2624-1205 cases. All four are in very good condition. All hinges and handles work as they should. They are packed with customizable foam.
Each cost around $800 if purchased new.
Specs and product details as told by manufacturer:
INTERIOR (L X W X D)
26.06" x 24.00" x 16.93" (66.2 x 61 x 43 cm)
EXTERIOR (L X W X D)
29.06" x 27.00" x 20.69" (73.8 x 68.6 x 52.6 cm)
LID DEPTH: 5.06" (12.9 cm)
BOTTOM DEPTH: 11.87" (30.1 cm)
TOTAL DEPTH: 16.93" (43 cm)
INT VOLUME: 6.13 ft³ (0.174 m³)
WEIGHT: 34.10 lbs (15.5 kg)
BUOYANCY: 552.43 lbs (250.6 kg)
BODY: RotoMolded Polyethylene
LATCH: Steel (Nickel-black Plated)
O-RING: Silicone Sponge
PINS: Stainless Steel
PINS (ALT): Aluminum
PURGE BODY: Aluminum
MINIMUM TEMPERATURE: -20° F (-29 ° C)
MAXIMUM TEMPERATURE: 140° F (60 ° C)
Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
Reinforced corners and edges for additional impact protection
Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
Recessed hardware for extra protection
Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
One-piece construction, molded from lightweight, high-impact polyethylene
Pelican Hardigg AL2624-1205 Case
Contact Info
Ben 850-712-4455
Price
$85 Each. All four for $300. Willing to consider trades for firearms +/- cash.
Item DescriptionThese are Hardigg AL2624-1205 cases. All four are in very good condition. All hinges and handles work as they should. They are packed with customizable foam.
Each cost around $800 if purchased new.
Specs and product details as told by manufacturer:
INTERIOR (L X W X D)
26.06" x 24.00" x 16.93" (66.2 x 61 x 43 cm)
EXTERIOR (L X W X D)
29.06" x 27.00" x 20.69" (73.8 x 68.6 x 52.6 cm)
LID DEPTH: 5.06" (12.9 cm)
BOTTOM DEPTH: 11.87" (30.1 cm)
TOTAL DEPTH: 16.93" (43 cm)
INT VOLUME: 6.13 ft³ (0.174 m³)
WEIGHT: 34.10 lbs (15.5 kg)
BUOYANCY: 552.43 lbs (250.6 kg)
BODY: RotoMolded Polyethylene
LATCH: Steel (Nickel-black Plated)
O-RING: Silicone Sponge
PINS: Stainless Steel
PINS (ALT): Aluminum
PURGE BODY: Aluminum
MINIMUM TEMPERATURE: -20° F (-29 ° C)
MAXIMUM TEMPERATURE: 140° F (60 ° C)
Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
Reinforced corners and edges for additional impact protection
Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
Recessed hardware for extra protection
Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
One-piece construction, molded from lightweight, high-impact polyethylene
