SDEFENSE19
Shooter
- Joined
- Jan 8, 2021
- Messages
- 1
- Points
- 3
- Price
- 13750
- Item Location
- Molino
Have an open box MK7 Revolution unit for sale with all the sensors and in absolutely perfect condition. The round count for this unit is ZERO and has only been cycled with a clear shell plate for indexing the tool head. (You will need to index the machine and calibrate it after receiving, tolerances shift and tension changes once disassembled).
It can be classed as an open box and assembled in our shop, but really it was only set up as a result of some major changes earlier in the year. Since then I have kept it set up for its intended purpose which was originally for loading that evil black rifle cartridge.
Unfortunately, he needs a new home as our business needs have changed.
You will receive all original packaging, manuals, sensors, black rifle set up and dies, Mr. Bullet Feeder Pro, etc. We opted to go all out and are including every sensor that fits the Revolution, the updated heavy duty tool head nut, 2 additional toolheads, stop switch, etc.
If you would like to compare our price against MK7 Reloading's list price for all that you will get here please see our comparison picture on this listing. Hell even better you have ZERO worries about waiting for any backordered sensors or parts since we already did all the waiting for you!
Please see ALL pictures & details below to understand what you are purchasing as well as each item included in this item description.
As for shipping cost and method... we are covering the shipping cost which must be palletized due to the large number of boxes and wooden crates required to safely send your press. This will ensure you receive your press in perfect condition without any missing pieces or damaged parts.
LOCAL MEETUP AVAILABLE UP TO 2 HOURS UTSIDE OF MOLINO, FL!!!
IF SHIPPED:
[PLEASE NOTE: THIS ITEM REQUIRES AN ADULT SIGNATURE (18+) TO BE RELEASED BY THE SHIPPING CARRIER!
***PLEASE READ! SHIPPING INSURANCE IS THE RESPONSIBILITY OF THE BUYER! WE GENERALLY ADVISE INSURING YOUR ORDER FOR THE AMOUNT YOU PAID. WHILE THIS WILL ADD ADDITIONAL COST TO THE SALE PRICE WE STRONGLY RECOMMEND IT FOR PEACE OF MIND AND BEING ABLE TO RECOUP ANY EQUIPMENT LOSSES, THEFT, OR DAMAGES THAT MAY OCCUR DURING TRANSIT. UNDERSTAND THAT ONCE YOUR ORDER HAS LEFT OUR POSSESSION WE HAVE ZERO CONTROL OVER THE SHIPPING PROCESS UNTIL IT REACHES IT'S FINAL DESTINATION.
***ALLOW ME TO BEAT A DEAD HORSE ONCE AGAIN***
-THOUGH SHIPPING INSURANCE IS NOT MANDATORY IT IS STRONGLY RECOMMENDED! WE ADVISE THAT YOU OPT FOR A COMPARABLE POLICY THAT WILL COVER YOUR OUT-OF-POCKET COSTS SHOULD YOUR MK7 REVOLUTION BECOME LOST, STOLEN OR DAMAGED WHILE IN TRANSIT!
[CONDENSED VERSION - SHOULD YOU DECLINE SHIPPING INSURANCE YOU UNDERSTAND ABSOLUTELY AND UNEQUIVOCALLY WITHOUT QUESTION THAT WE ARE NOT LIABLE FOR ANY DAMAGES, LOSSES, OR THEFT CONCERNING YOUR ORDER. SHOULD YOU DECLINE INSURANCE YOU ARE SOLELY RESPONSIBLE FOR THE UNLIMITED NUMBER OF POSSIBLE SCENARIOS WE CAN'T EVEN BEGIN TO LIST HERE... LAST TIME ILL SAY IT! OPT FOR SHIPPING INSURANCE!✓
ITEMS INCLUDED IN YOUR ORDER:
(1) - Mk7 Reloading Revolution Automatic 10-Stage Progressive Press in 223REM
(Includes 14" Case feeder Collator Assembly, Mr. Bullet Feeder Pro, and vibratory primer collator plus digital powder measure [rifle])
(2) - Spare Auminum Toolheads w/ homemade stands
(1) - Spare Aluminum Tool Head reduced edge to trim brass without modifying your vacuum hose adapter
(2) - Digital Powder Measurers (pistol & rifle)
(1) - MK7 TABLET which includes both memory cards and updated software
(Sensors included either installed or in box with all original and extra hardware provided by MK7:
-SwageSense
-DecapSense
-Primer Orientation Sensor
-BulletSense
-PowderSense Checker
-Auto-Stop button
-MK7 Power distributor/motor communication box for installing sensors, powder measures, and various power supply for on board functions
Included Dies: (USED but in excellent condition)
- RCBS TC 5.56x45mm small base sizing and bullet seating dies
-Lee Factory Crimp Die - 223 Rem
-LYMAN "M" Die (expander) (new)
-Lee Universal decapping die
-FW Arms™ AUTO-CASE CENTERING DYNAMIC SPRING HOLD DOWN DIE
Additional items included:
- Caliber Conversion Kit: .308 Winchester
{Included Items: .308 Win Shell Plate, Large Case Feeder Tube, Large Rifle/Pistol Priming Punch, and Large Primer Pocket Swaging Rod (new)}
-Mr. Bullet Feeder Pro Conversion Kit:
9mm (Never used) Purchased for 9mm obviously, but the Revolution 9mm Caliber Conversion Kit was backordered.
**If you would like to load 9mm on this press you will need a MK7 Revolution 9mm Caliber Conversion Kit and set of 9mm dies which may be purchased from MK7 Reloading or one of their authorized resellers.
{To be clear, this listing does NOT include any 9mm dies or 9mm caliber conversion kit for the MK7 Revolution**}
-(4) New Shell plate tensioner springs
-(2) New sets of case feeder springs
-(100) pack of black zip ties
-(2) Additional guide rod supports upgrade to ensure additional support and rigidity while tightening up alignment during press operations. 2 of the 3 tool heads are fitted with these additional guide rod upgrades
-Press has been greased as suggested by MK7's official OEM manual using Red and Tacky and general purpose grease
Please don't hesitate to reach out to us If you have any questions regarding setup, due selections, or if you're new to reloading and just need someone to walk you through set-up. We all had to start somewhere! Please send us a message and we will get back to you in an hour or less!
Thank you! Your press ships within 2 days of order confirmation. Takes a bit to fully pack and account for everything.
It can be classed as an open box and assembled in our shop, but really it was only set up as a result of some major changes earlier in the year. Since then I have kept it set up for its intended purpose which was originally for loading that evil black rifle cartridge.
Unfortunately, he needs a new home as our business needs have changed.
You will receive all original packaging, manuals, sensors, black rifle set up and dies, Mr. Bullet Feeder Pro, etc. We opted to go all out and are including every sensor that fits the Revolution, the updated heavy duty tool head nut, 2 additional toolheads, stop switch, etc.
If you would like to compare our price against MK7 Reloading's list price for all that you will get here please see our comparison picture on this listing. Hell even better you have ZERO worries about waiting for any backordered sensors or parts since we already did all the waiting for you!
Please see ALL pictures & details below to understand what you are purchasing as well as each item included in this item description.
As for shipping cost and method... we are covering the shipping cost which must be palletized due to the large number of boxes and wooden crates required to safely send your press. This will ensure you receive your press in perfect condition without any missing pieces or damaged parts.
LOCAL MEETUP AVAILABLE UP TO 2 HOURS UTSIDE OF MOLINO, FL!!!
IF SHIPPED:
[PLEASE NOTE: THIS ITEM REQUIRES AN ADULT SIGNATURE (18+) TO BE RELEASED BY THE SHIPPING CARRIER!
***PLEASE READ! SHIPPING INSURANCE IS THE RESPONSIBILITY OF THE BUYER! WE GENERALLY ADVISE INSURING YOUR ORDER FOR THE AMOUNT YOU PAID. WHILE THIS WILL ADD ADDITIONAL COST TO THE SALE PRICE WE STRONGLY RECOMMEND IT FOR PEACE OF MIND AND BEING ABLE TO RECOUP ANY EQUIPMENT LOSSES, THEFT, OR DAMAGES THAT MAY OCCUR DURING TRANSIT. UNDERSTAND THAT ONCE YOUR ORDER HAS LEFT OUR POSSESSION WE HAVE ZERO CONTROL OVER THE SHIPPING PROCESS UNTIL IT REACHES IT'S FINAL DESTINATION.
***ALLOW ME TO BEAT A DEAD HORSE ONCE AGAIN***
-THOUGH SHIPPING INSURANCE IS NOT MANDATORY IT IS STRONGLY RECOMMENDED! WE ADVISE THAT YOU OPT FOR A COMPARABLE POLICY THAT WILL COVER YOUR OUT-OF-POCKET COSTS SHOULD YOUR MK7 REVOLUTION BECOME LOST, STOLEN OR DAMAGED WHILE IN TRANSIT!
[CONDENSED VERSION - SHOULD YOU DECLINE SHIPPING INSURANCE YOU UNDERSTAND ABSOLUTELY AND UNEQUIVOCALLY WITHOUT QUESTION THAT WE ARE NOT LIABLE FOR ANY DAMAGES, LOSSES, OR THEFT CONCERNING YOUR ORDER. SHOULD YOU DECLINE INSURANCE YOU ARE SOLELY RESPONSIBLE FOR THE UNLIMITED NUMBER OF POSSIBLE SCENARIOS WE CAN'T EVEN BEGIN TO LIST HERE... LAST TIME ILL SAY IT! OPT FOR SHIPPING INSURANCE!✓
ITEMS INCLUDED IN YOUR ORDER:
(1) - Mk7 Reloading Revolution Automatic 10-Stage Progressive Press in 223REM
(Includes 14" Case feeder Collator Assembly, Mr. Bullet Feeder Pro, and vibratory primer collator plus digital powder measure [rifle])
(2) - Spare Auminum Toolheads w/ homemade stands
(1) - Spare Aluminum Tool Head reduced edge to trim brass without modifying your vacuum hose adapter
(2) - Digital Powder Measurers (pistol & rifle)
(1) - MK7 TABLET which includes both memory cards and updated software
(Sensors included either installed or in box with all original and extra hardware provided by MK7:
-SwageSense
-DecapSense
-Primer Orientation Sensor
-BulletSense
-PowderSense Checker
-Auto-Stop button
-MK7 Power distributor/motor communication box for installing sensors, powder measures, and various power supply for on board functions
Included Dies: (USED but in excellent condition)
- RCBS TC 5.56x45mm small base sizing and bullet seating dies
-Lee Factory Crimp Die - 223 Rem
-LYMAN "M" Die (expander) (new)
-Lee Universal decapping die
-FW Arms™ AUTO-CASE CENTERING DYNAMIC SPRING HOLD DOWN DIE
Additional items included:
- Caliber Conversion Kit: .308 Winchester
{Included Items: .308 Win Shell Plate, Large Case Feeder Tube, Large Rifle/Pistol Priming Punch, and Large Primer Pocket Swaging Rod (new)}
-Mr. Bullet Feeder Pro Conversion Kit:
9mm (Never used) Purchased for 9mm obviously, but the Revolution 9mm Caliber Conversion Kit was backordered.
**If you would like to load 9mm on this press you will need a MK7 Revolution 9mm Caliber Conversion Kit and set of 9mm dies which may be purchased from MK7 Reloading or one of their authorized resellers.
{To be clear, this listing does NOT include any 9mm dies or 9mm caliber conversion kit for the MK7 Revolution**}
-(4) New Shell plate tensioner springs
-(2) New sets of case feeder springs
-(100) pack of black zip ties
-(2) Additional guide rod supports upgrade to ensure additional support and rigidity while tightening up alignment during press operations. 2 of the 3 tool heads are fitted with these additional guide rod upgrades
-Press has been greased as suggested by MK7's official OEM manual using Red and Tacky and general purpose grease
Please don't hesitate to reach out to us If you have any questions regarding setup, due selections, or if you're new to reloading and just need someone to walk you through set-up. We all had to start somewhere! Please send us a message and we will get back to you in an hour or less!
Thank you! Your press ships within 2 days of order confirmation. Takes a bit to fully pack and account for everything.
