SouthBound
Expert
I'm not one to sit around so I decided to take some videos of me doing what I usually do when I'm board, which is reloading or prepping brass to reload. I only have two videos complete so far and will get the rest up over the next coupe of days. I just got this idea about 9:00pm last night so...
These are whats posted...
1: Cleaning Brass
2: Lube, Resize and Trim
I plan on adding a full set of videos which will include:
I also will add some videos showing:
Trimming 223 with the Worlds Finest Trimmer and a Drill
Progressive reloading, using the Frankford VibraPrime, home made bullet feeder and so on.
I plan on taking some video at the range as well showing how I use a Chronograph and pick the best load for my rifles and more...
Anyway, the site is located at http://www.pensacolareloaders.com if anyone is interested. I'm just a novice so my ways may not be the best but they work well for me. I'm also not a TV host so bear with me on the videos... I'm also going to add some intro music and a disclaimer to the videos tonight...
http://www.pensacolareloaders.com
These are whats posted...
1: Cleaning Brass
2: Lube, Resize and Trim
I plan on adding a full set of videos which will include:
- Primer Pocket Unifying and Primer Swagging
- Flash Hole Unifying/Cleaning
- Deburring and Chamfering
- Charging with Powder using multiple options
- Bullet Seating and Crimping
I also will add some videos showing:
Trimming 223 with the Worlds Finest Trimmer and a Drill
Progressive reloading, using the Frankford VibraPrime, home made bullet feeder and so on.
I plan on taking some video at the range as well showing how I use a Chronograph and pick the best load for my rifles and more...
Anyway, the site is located at http://www.pensacolareloaders.com if anyone is interested. I'm just a novice so my ways may not be the best but they work well for me. I'm also not a TV host so bear with me on the videos... I'm also going to add some intro music and a disclaimer to the videos tonight...
http://www.pensacolareloaders.com
Last edited: