APOD Firearms

Taurus CT40G2 Magizines

The #1 community for Gun Owners of the Gulf Coast States

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Rebel_Rider1969

    Well Known Nuisance
    Rating - 100%
    35   0   0
    Joined
    Sep 12, 2019
    Messages
    19,756
    Points
    113
    Location
    Range, Al. Near Brewton.
    Figured I'd move this over here. Looking for taurus mags to fit the CT40. Now there has to be a magizine that can be "tweaked" to work in it. Remember it's the 40 cal not the 9mm. Heres some pix. The notch on the back is for the catch. Rounds are presented flat at the mag. Dig thru those parts boxes!!!!!

    Rifle
    20191104_141943.jpg

    Magazine
    20191105_081455.jpg
    20191105_081507.jpg
    20191105_081521.jpg
     

    Attachments

    • 20191104_141943.jpg
      20191104_141943.jpg
      1.2 MB · Views: 395
    • 20191105_081455.jpg
      20191105_081455.jpg
      534.7 KB · Views: 412
    • 20191105_081507.jpg
      20191105_081507.jpg
      441.9 KB · Views: 409
    • 20191105_081521.jpg
      20191105_081521.jpg
      340.7 KB · Views: 381
    Last edited:

    Rebel_Rider1969

    Well Known Nuisance
    Rating - 100%
    35   0   0
    Joined
    Sep 12, 2019
    Messages
    19,756
    Points
    113
    Location
    Range, Al. Near Brewton.
    The sad thing is Brazil / south America has been using the smt 40 for over 10 years. There has to be a mountain of 30rd mags there. How do we get them? The mag says "SMT /CT 40" on it.
     

    oneshot

    Master
    Rating - 100%
    2   0   0
    Joined
    Sep 27, 2012
    Messages
    2,897
    Points
    113
    Location
    North end santa rosa
    look at the Mic= mages and Uzi uzi made a 40 cal mag it was for the 41 action 9 mag are cheap if you want to work on them also check out stin mags. I think all them have the rib on the back. Just my 5 cents jj
     

    Rebel_Rider1969

    Well Known Nuisance
    Rating - 100%
    35   0   0
    Joined
    Sep 12, 2019
    Messages
    19,756
    Points
    113
    Location
    Range, Al. Near Brewton.

    look at the Mic= mages and Uzi uzi made a 40 cal mag it was for the 41 action 9 mag are cheap if you want to work on them also check out stin mags. I think all them have the rib on the back. Just my 5 cents jj

    Thanks! Got square eyes from combing the internet!
     

    Rebel_Rider1969

    Well Known Nuisance
    Rating - 100%
    35   0   0
    Joined
    Sep 12, 2019
    Messages
    19,756
    Points
    113
    Location
    Range, Al. Near Brewton.
    Mag maker must be a popular fellow!

    Took forever to track him down. No ads up or anything. He built a press, made a mold for the mag follower and welds em up. Alot of labor. Anyway, I think there are so few that it's not a big enough market for promag,asc or c products to make them. Too bad cause it's a solid carbine. Shoots great and is very accurate. Easy to take down and clean. Very H&K ish.
     

    RidgeRunner

    Master
    GCGF Supporter
    Rating - 100%
    28   0   0
    Joined
    Sep 12, 2014
    Messages
    4,290
    Points
    113
    Location
    Beulah
    I have a few sten mags if you want to try to fit
     

    Latest posts

    Top Bottom