Charger .22 build. Kick in.

[Snake-Eyes]

Probably wouldn’t matter if the top cover “did” still secure with the original screws: it would melt with proper use of that suppressor.

 

[Rebel_Rider1969]

Probably wouldn’t matter if the top cover “did” still secure with the original screws: it would melt with proper use of that suppressor.

Ya know that's a good point.

 

[Rebel_Rider1969]

Well it looks like the seller is going to Welch on the deal. No communication since the auctions end. 5 days. Back to sniping. Dang it. I knew it was too good to be true.

 

[850guns]

Never bid on an item for sale that has a NR not rated seller.

 

[Fathertime]

This is my fun gun mine has a 10 inch Shaw barrel with a Rival Arms chassis, Veridian laser stop, hogue grip, SBS tactical brace and Trijicon RMR plus, plus, plus. From start to finish I was amazed how much gets invested. Not a cheap project.

 

[Rebel_Rider1969]

This is my fun gun mine has a 10 inch Shaw barrel with a Rival Arms chassis, Veridian laser stop, hogue grip, SBS tactical brace and Trijicon RMR plus, plus, plus. From start to finish I was amazed how much gets invested. Not a cheap project.

Very nice though. Nice can.
Yeah then add binary trigger $250. Toys are expensive. I'll figure something out.

 

[Rebel_Rider1969]

Never bid on an item for sale that has a NR not rated seller.

Yep, saw that after I won. I was shotgun bidding on several. Back at it today. Wanted to build something tec 22 sized. Without the can.

 

[Rebel_Rider1969]

May put this on a back burner till I get home. Can find one locally later I'm sure.
Trying to chase down a 15-22 upper I can get the barrel cut threaded to 4.5. From a $$ standpoint the 15-22P would be a better choice, already have it set up and a pile of mags. Nothing else to buy. Push two pins and swap. (8 inch now)

 

[850guns]

I may have mentioned it before, CMMG Banshee... just saying

 

[Rebel_Rider1969]

I may have mentioned it before, CMMG Banshee... just saying

They are nice but I'm got a pile of the mags and it eats everything except 710 fps quiet. Had good luck with the rifle version and the pistol. I see the dopes at sw made it a nfa item and have removed the pistol from general sale. I'll fiddle around with the springs and get it to run on the 710 later.
*Tippman m4 is supposed to be good too.
** the 15-22P bolt is 1/2 oz lighter than the rifle bolt.

 

[850guns]

They are nice but I'm got a pile of the mags and it eats everything except 710 fps quiet. Had good luck with the rifle version and the pistol. I see the dopes at sw made it a nfa item and have removed the pistol from general sale. I'll fiddle around with the springs and get it to run on the 710 later.
*Tippman m4 is supposed to be good too.
** the 15-22P bolt is 1/2 oz lighter than the rifle bolt.

Yeah, not sure the magazines are compatible.

 

[Rebel_Rider1969]

Yeah, not sure the magazines are compatible.

They do

Better-Mag S&W® .22 Rimfire Magazine Adaptor - Redi-Mag

THE BMA II IS BACK IN STOCK!!! An innovative, yet inexpensive adaptor allowing the use of Smith & Wesson .22 Rimfire magazines in a standard AR15 lower receiver.

www.redi-mag.com

 

[850guns]

They do

Better-Mag S&W® .22 Rimfire Magazine Adaptor - Redi-Mag

THE BMA II IS BACK IN STOCK!!! An innovative, yet inexpensive adaptor allowing the use of Smith & Wesson .22 Rimfire magazines in a standard AR15 lower receiver.

www.redi-mag.com

Ok.....

 

[Snake-Eyes]

Not cheap. Only one of these links is currently in stock.
But it exists…

BG Complete 4.5" .22LR Upper Receiver - Black | 4.25" M-LOK | Dimpled Flash Can | With BCG & CH

Veteran-owned and operated, we utilize a live inventory system to give you the latest and best in replacement AR-15 parts and accessory upgrades as well as Glocks. Choose from the most reputable brands to build an AR-15 or Glock pistol that's entirely your own. Free shipping available on select...

www.righttobear.com

4.5" .22LR Upper Receiver Build Kit | 4.5" Barrel | 4.25" Rail | Flash Can | BCG & CH

Veteran-owned and operated, we utilize a live inventory system to give you the latest and best in replacement AR-15 parts and accessory upgrades as well as Glocks. Choose from the most reputable brands to build an AR-15 or Glock pistol that's entirely your own. Free shipping available on select...

www.righttobear.com

 

[Viper0hr]

I have a dedicated CMMG in.22 and love it, I snagged it on sale and when the mid length barrel ones were actually in stock, but I like it.
I would like a nice decked out 10/22 too though haha.