Hello fellow firearm enthusiasts. As fate would have it I ended up keeping my SOCOM 16 that has been collecting dust in the safe for a good while now. I’ve since taken it out and messed with it a bit and am happy it ended up not trading.
There is more than enough info out there on history and platform operating system etc. So I’m just going to ramble about my personal thoughts on the rifle, take it worth a grain of salt.
As currently configured I have my 16 dressed in a surplus m14 stock with aluminum handguard. I believe it is walnut. I removed the scout rail. It basically looks like a chopped down M14.
OP guide rod, spring, gas piston, mag catch and bolt release have been upgraded with SADLAK components. How much of an improvement in grouping I have yet to see since I still have to get this pup on a rest and see how she groups. Though standing unsupported I have no trouble hitting cans or clay pigeons at approx 25m. Not a measure of accuracy but still confidence inspiring.
At just over 37in with a 16in barrel this guy packs a punch. Conscious proper shoulder pocket placement and applying the fundamentals keep punishment to a minimum and follow up shots fairly quick.
To that end the irons are not NM. The front blade is thick enough to house the tritium vial it comes from the factory with and the single rear aperture is .375 I think? Anyhow even a guy with eye problems or injuries can pick up a clear sight picture using these sights. To compare it is easier for me than an AR iron sights on the distance aperature. That’s just me though.
Springfield has a proprietary muzzle brake built into the rifle that does a good job taming the climb but not the flash.
Overall fit and finish is remarkable. I rarely like American mfg because of poor mfg process, metallurgy, or just sub standard products but IMO Springfield Armory is still churning out some quality rifles. Machining is awesome, finish durable and even, parts fit as if they were hand fitted.
I’m curious as to the barrel still as all I can find is that it is a carbon steel barrel. I guess I’ll just have to see how it wears over time.
I put some Tula steel and a bunch of brass threw it. So far it has chewed on everything fed. The action is robust to say the least and would hate to get my finger caught in there.
I have a ton of extras for this thing including a really nice receiver scope mount. I am lacking the glass to put on it. Quality deserves quality and I am still debating on what to throw on there. Not planning on plinking at much past 400m so that narrows it down. With irons I am confident I could nail a 300m man sized tgt no problem. The stock irons are just that nice.
I can see why these still go for 1.5k. More than worth it for a reliable semi auto 308 in such a compact size. Proven action and round, all in a compact package. If you ever get a chance to handle one or better yet fire one jump on it. You will either have to have it on the spot or at least know it’s not for you.
This little guy makes an awesome camping gun or ranch gun. Has that overbuilt feel to it that won’t make you worried if you bang it up or beat it up in the bush. Pics to follow for fun. Thanks all
There is more than enough info out there on history and platform operating system etc. So I’m just going to ramble about my personal thoughts on the rifle, take it worth a grain of salt.
As currently configured I have my 16 dressed in a surplus m14 stock with aluminum handguard. I believe it is walnut. I removed the scout rail. It basically looks like a chopped down M14.
OP guide rod, spring, gas piston, mag catch and bolt release have been upgraded with SADLAK components. How much of an improvement in grouping I have yet to see since I still have to get this pup on a rest and see how she groups. Though standing unsupported I have no trouble hitting cans or clay pigeons at approx 25m. Not a measure of accuracy but still confidence inspiring.
At just over 37in with a 16in barrel this guy packs a punch. Conscious proper shoulder pocket placement and applying the fundamentals keep punishment to a minimum and follow up shots fairly quick.
To that end the irons are not NM. The front blade is thick enough to house the tritium vial it comes from the factory with and the single rear aperture is .375 I think? Anyhow even a guy with eye problems or injuries can pick up a clear sight picture using these sights. To compare it is easier for me than an AR iron sights on the distance aperature. That’s just me though.
Springfield has a proprietary muzzle brake built into the rifle that does a good job taming the climb but not the flash.
Overall fit and finish is remarkable. I rarely like American mfg because of poor mfg process, metallurgy, or just sub standard products but IMO Springfield Armory is still churning out some quality rifles. Machining is awesome, finish durable and even, parts fit as if they were hand fitted.
I’m curious as to the barrel still as all I can find is that it is a carbon steel barrel. I guess I’ll just have to see how it wears over time.
I put some Tula steel and a bunch of brass threw it. So far it has chewed on everything fed. The action is robust to say the least and would hate to get my finger caught in there.
I have a ton of extras for this thing including a really nice receiver scope mount. I am lacking the glass to put on it. Quality deserves quality and I am still debating on what to throw on there. Not planning on plinking at much past 400m so that narrows it down. With irons I am confident I could nail a 300m man sized tgt no problem. The stock irons are just that nice.
I can see why these still go for 1.5k. More than worth it for a reliable semi auto 308 in such a compact size. Proven action and round, all in a compact package. If you ever get a chance to handle one or better yet fire one jump on it. You will either have to have it on the spot or at least know it’s not for you.
This little guy makes an awesome camping gun or ranch gun. Has that overbuilt feel to it that won’t make you worried if you bang it up or beat it up in the bush. Pics to follow for fun. Thanks all