Brass For Sale ..... Cantonment

SAWMAN · Feb 19, 2019

Nope . . . don't have any SAUMz or RUMz but really need one of them elusive WSM/WSSM's. Still trying to figure what sized hole in the bbl and what action.
Hot loading a 45-70 in a Mauser,falling block,or even a NEF action is about all the recoil "needed" to have "fun". If more is needed you can rechamber to 45-90Express and use the thicker web brass. You can also use the Express brass cut back to 70 from 90. You can really have som "fun" with a Ruger #1 45-70 doin' dat. CAUTION: Do not try this in a #3. It will tear your hand up due to that weirdo lever.
The motivation to get 3000 from a 300 is another sorted saga from my pre old man daze. --- SAWMAN

Jester896 · Feb 19, 2019

Does an A Bolt II M1000 Eclipse in .270WSM crank your tractor?

Jester896 · Feb 20, 2019

SAWMAN said:
Still trying to figure what sized hole in the bbl and what action.

For me the choices would be .243WSSM or .270WSM. They are significantly different than the standard round.

SAWMAN · Feb 20, 2019

Nowadays my "tractor" is an old Farmall with bad injectors and bald tires . . . BUT . . . yeah . . . "putt,putt,putt" . . .
When you passin' through again ?? (And no stoppin' in Atmore to see Joel. He's a bad influence on you.) --- SAWMAN

Jester896 · Feb 20, 2019

HaHa...Church's owes me a mixed box...gotta go back

Might take me a month to get back by but I have to go to my buddies soon.

Got dies and new brass for the WSM too.

SAWMAN · Feb 28, 2019

I really would have thought that more people would shoot the 444Marlin down cheer hen Flah-Duh.
I have a lever gun that has slammed plenty of deer,bear,and moose up north. --- SAWMAN

bobinbusan · Feb 28, 2019

Hard to find the ammo local

SAWMAN · Mar 1, 2019

That's for sure Bob. And only a couple bullets offered. You gotta reload for this one. Then . . . any .429/.430" bullet . . but heavy is mo-bedda.
It is a Hornady 300gr XTP or a 300gr WFNGC (hardcast) for me. Then you have the pistol bullet at rifle velocity thing going on.
ADDED: FYI . . . a 180gr HP,with it's cavity hollowed out,and a "BB" pushed down in it,will tear a porcupine in half.
The "stand off" distance for this one is about 50ft. --- SAWMAN

Jester896 · Mar 1, 2019

Found something you might like when you pull those Lotts down

SAWMAN · Mar 2, 2019

Oh good Lord !! Are they brass ?? They look to have their own,built in,gas check also.
Box sez 3500fps. Hell . . . to me,sounds like a challenge.
Make some time to help me sight 'em in. --- SAWMAN

Jester896 · Mar 2, 2019

They are made out of copper and/or brass it says...load data is also on the page for .45-70...might not be hard to figure a starting for the Lott from that. It also says they might go faster than 3,500

https://www.lehighdefense.com/colle...me-penetrator-305gr-bullet?variant=2857643204

I finally found some Nosler .44 for my rifle in JSP instead of JHP and grabbed those 20 while I was there.

bobinbusan · Mar 2, 2019

Jester896 said:
Found something you might like when you pull those Lotts down

View attachment 71988

View attachment 71989

Has anybody loaded up some of these?

SAWMAN · Mar 2, 2019

Starting load for the Lott is max load for the 458Win Mag. As extended case chamberings go,the Lott puts out quite a bit more power than the Win Mag. They made some bolt guns for the Lott (CZ,etc.) but the action is super long.
I have been using a 8lb keg of DATA 2230 that I have had since 1981. ---- SAWMAN

SAWMAN · Aug 18, 2019

Updated available brass in OP.
Also have 10rds of 280Rem ----> FREE
About 30rds of 45ACP ----> FREE. --- SAWMAN

SAWMAN · Aug 26, 2019

Bump ---- sawman

Jester896 · Aug 30, 2019

Do you need .45 LC brass or bullets?

SAWMAN · Aug 30, 2019

Appreciate the thought sir,but I have 40-50pcs of brass and some bullets left over from my Casull days.
Workin' up some low pressure loads for my Taurus Public Defender Poly. --- SAWMAN

BamaFaninMilton · Aug 30, 2019

Hunkyfish said:
Find me some 6.5x55 Swedish Sawman

I have some if you want it, various brands and amounts...Remington, Hornady, PPU, whatever brand Fiocchi uses..don't know exact amounts until I sort it out, but you are welcome to it!

BamaFaninMilton · Aug 30, 2019

BamaFaninMilton said:
I have some if you want it, various brands and amounts...Remington, Hornady, PPU, whatever brand Fiocchi uses..don't know exact amounts until I sort it out, but you are welcome to it!

Oops just realized this is an old thread, but if anyone needs any 6.5x55 brass, let me know!

Jester896 · Aug 30, 2019

SAWMAN said:
Appreciate the thought sir,but I have 40-50pcs of brass and some bullets left over from my Casull days.
Workin' up some low pressure loads for my Taurus Public Defender Poly. --- SAWMAN

i fell into some dies, a good sized bag of brass (200?) and about 750 200 gr .452 hard cast...guess I could by another lever gun and matching pistola...nahh

Please read the new forum rules! REQUIRED!

Click Here: https://www.gulfcoastgunforum.com/threads/general-forum-rules-code-of-conduct.70770/

Brass For Sale ..... Cantonment

The #1 community for Gun Owners of the Gulf Coast States

Member Benefits:

Master

Master

Master

Master

Master

Master

Master

Master

Master

Attachments

Master

Master

Master

Master

Master

Master

Master

Master

Emeritus

Emeritus

Master